2009 Strautmann 1050 Tub Feeder
Very little used, mint condition throughout.
Teagle 8500 Silage & Straw Bale Processor
Suitable for round or square bales. Totally as new throughout.
Kuhn 1460 Euromix Horizontal Auger Diet Feeder
Fully checked through, some new blades fitted. Ready for work.
New Tanco I73 Bale Shear
Ideal for handling bales directly into mixer wagons or feed passageways and feeding rings
New McHale 994 Round Bale Splitter
The McHale round bale splitter will securely transport bales from the stacking site to the feeding location.
New Strautmann Vertical Diet Feeder Range
Verti-Mix diet feeders are built with an excellent mixing quality allowing livestock to get the ultimate nutrition delivering higher milk yields.
New McHale R5 Bale Grab with JCB Q-Fit Brackets
Already fitted with JCB Q-Fit Brackets. This grab is ready immediately and can be sent on a pallet.
New McHale C460 Trailed Silage Feeder and Straw Blower
The C460 is the top of the range McHale Silage Feeder & Straw Blower, It is a trailed machine with capacity for 2 4ft round bales.
New Hustler SL360X Bale Feeder
Has a self-loading 3-point linkage, it is suitable for feeding out round and square bales, baled silage and loose silage. It can handle bales up to 1250kg and operates on tractors from 60HP upwards.
9 Tine Trip Buck Rake
Barn stored, never used before. As new.
Used Teagle Tomahawk 404 Round Bale Chopper
This bale chopper has been fully checked through, serviced and fully refurbished. It is like new.
Used Redrock VM12 Vertical Tub Feeder
Vertical Tub Feeder with 4 feed out doors.
Used Redrock 8ft 6in 13 Tine Push-off Buck Rake
Twin-ram with very little use. The Buck Rake is "AS NEW"
Used Redrock 4ft Rear Reach Shear Grab
Fully checked through, very straight grab.
Kverneland Taarup 853 Bale Chopper
2 speed gearbox, giraffe swivel chute, excellent condition throughout
Teagle Tomahawk 8100 Feeder / Bedder
This feeder has been used as a demo but has only done approx 2hrs of work. It is as new.
2009 Taarup Siloking Premium Vertical Tub Feeder
14 cubic meter feeder with front cross conveyor and 2 speed gearbox.
2013 Strautmann 1250 Vertical Tub-Feeder
Vertical Tub-Feeder with front cross conveyor, in mint condition.
Kuhn 1460 Euromix Feeder
Feeder with right hand elevator and left hand chute. Fully checked through and ready for immediate use. It is absolutely mint throughout.
2013 Kverneland Taarup Silo King 18m Duo Tub Feeder
Twin Auger Tub Feeder. Comes with front cross conveyor, R/H elevator and R/H rear door. The feeder is fully checked through and ready for work. It is in mint condition throughout.
Kuhn 1060 Euromix Feeder
Feeder with right hand elevator and left hand chute. Fully checked through and ready for immediate use. It is absolutely mint throughout.
2014 Strautmann Vertimix 2000 Twin Auger Tub Feeder
Comes with front cross conveyor and 2 rear doors. The feeder is fully checked through and in mint condition
Kverneland 853 Bale Chopper
This machine is designed to chop and distribute straw, hay and silage. It can be used for bedding and feeding when working with baled straw, hay or silage and clamp silage.
Hi Spec V12 Vertical Auger Feeder
With a 12 cubic meter capacity, 2 side doors and 1 rear door this feeder is in mint condition
To speak with our sales team call: NI 028 6634 8213 | ROI 048 6634 8213
New & Used Winter Feeding Equipment
We supply a wide range of winter feeding machinery, from Shear Grabs to Tub-feeders we always aim to be well stocked to help you through the winter months. As will all machinery supplied by McCullagh Machinery we make sure that we only supply the finest used machines and tools.
Support & Back-up
Everything we sell comes with a warranty so you can be sure that we will be there for you in the event of a failure in your equipment. We will also help you in any way that we can with the set-up, callibration and configuration of your equipment. We are here to ensure that your tools and machinery serve you well for the long-term.